TR- 3 Layers Polyester Spunbond With PTFE Membrane For Gas Turbine and Clean Room
![TR500_Material](http://www.jinyoueptfe.com/uploads/TR500_Material.jpg)
Layer 1 - Pre-filter
-Captures Larger Particulate
-Initial Depth loading Layer
-High Dust Holding Capacity
-Keeps Salt, Hydrocarbons and Water off the Turbine Blades
Layer 2 - E12 HEPA Membrane
-Relaxed PTFE Barrier
-99.6% Efficient at MPPS
-Hydro-Oleophobic
-Submicron Dust Removal
-Total Moisture Barrier
Layer 3 - heavy duty Backer
-High Strength
-Water Resistant
![TR500_Layers](http://www.jinyoueptfe.com/uploads/TR500_Layers.jpg)
Cross String Configuration
-Reduces Particulate Bridging
-Reduces Static Pressure
-Increases Dust Release
-Keeps Pleats Permanently Separated
-Maximizes Media Utilization
-No Heavy Outer Cage
-No Corrosion!
TR500-200
A 3-layer construction with high efficiency and lower pressure drop, this fully synthetic E12 media will optimize power output, reduce maintenance cost and increase compressor & turbine lifetime. A 3rd outer layer acts as a Pre-Filter to remove larger particulate, keeping unburnt hydrocarbons, salt, moisture and all particulate from getting to the HEPA membrane. Our proprietary ePTFE second layer is thermally bonded to a Bi-Component Polyester Spunbond base through a unique process that forms a perma-bond membrane without solvents, chemicals or binders. The proprietary Relaxed Membrane will not rupture or break during filter processing. The TR family medias are great for Gas Turbines and compressors.
![Gas turbine electrical power plant with twilight](http://www.jinyoueptfe.com/uploads/Gas_Turbine_Plant_GettyImages-853833434.jpg)
APPLICATIONS
• Gas turbine HEPA grade
• Power plants
• Pharmaceutical
• Biomedical air filtration
• Hazardous material collection
• Electronics
• Compressors
TR500-70
A 3-layer construction with high efficiency and lower pressure drop, this fully synthetic media will optimize power output, reduce maintenance cost and increase compressor & turbine lifetime. A 3rd outer layer acts as a Pre-Filter to remove larger particulate, keeping unburnt hydrocarbons, salt, moisture and all particulate from getting to the HEPA membrane or 2nd stage filter.
![The production process in the rolling mill](http://www.jinyoueptfe.com/uploads/TR-500_AdobeStock_141297244.jpg)
APPLICATIONS
• Gas turbine HEPA grade
• Power plants
• Pharmaceutical
• Biomedical air filtration
• Hazardous material collection
• Electronics
• Compressors